ABB GWT C9 Product Manual page 80

5 Repair
5.3.1 Remove/reassemble the protective cover
Continued
4
5
6
7
8
Reassembling the protective cover
1
2
3
4
80
Action
Unscrew the knurled screw (pos. 1).
Remove the pressure washer (pos. 2) keeping the protecting cover (pos. 3) in place.
Remove the protecting cover (pos. 3), weight about 2.5 kg.
Perform the required repair work.
Make sure that the working space is cleaned and that all equipment is removed before
restarting the welding.
Action
Reassemble the protecting cover (pos. 3).
Reassemble the pressure washer (pos. 2).
Tighten the knurled screw by hand (pos. 1).
Make sure that the working space is cleaned and that all equipment is removed before
restarting the welding.
© Copyright 2022 ABB. All rights reserved.
Product manual - GWT C9
3HAA010198-001 Revision: A