Storage - ABB GWT C9 Product Manual

6 Storage and decommissioning

6.2 Storage

6.2 Storage
General
If the welding gun should be stored, always follow the steps described in the
following section.
Read the introduction section before putting the GWT C9 into storage (see
Introduction on page
Required equipment
Qty
1
1
-
Procedure
1
2
3
4
112
111).
Equipment
Standard toolkit
Compressed air
Plugs
Action
Purge the remaining cooling water from the water
circuit with compressed air and plug the connec-
tion ports.
Protect the nipples and connections from mech-
anical impact.
Cover the the welding gun to protect if from dust
and other unwanted particles.
Store the welding gun were it is protected from
direct sunlight and in an place that meets the re-
quirements regarding temperature and hygro-
metry.
© Copyright 2022 ABB. All rights reserved.
Product (example)
See Standard toolkit on page
Note
See Temperature and hygrometry
on page 43.
Product manual - GWT C9
3HAA010198-001 Revision: A
120.