ABB GWT C9 Product Manual page 15

Personal protective equipment
Always use suitable personal protective equipment, based on the risk assessment
for the installation.
Protective gloves
Sheet metal parts may have sharp edges and welded parts in general may be hot
after welding. When handling such parts, use protective gloves.
Hearing protection
Material handling, surrounding processes and operations can cause high noise
levels. User hearing protection when being near the production cell.
Goggles
There might be a risk of weld spatter from near by weld process which can cause
eye injuries. There might also be a risk of processing chips/dust being spread due
to the cleaning functionality of the cutter. Use goggles within the production cell.
Protective shoes
At a workplace where lifting and handling of parts occur, protective shoes shall
always be used.
Padlock
When intervention is needed, the power supply must be turned off to the machines
within the danger area and the main safety switch padlocked.
Allergenic material
See
in the product, if any.
Product manual - GWT C9
3HAA010198-001 Revision: A
1.3.1 Safety risks during installation and service work on GWT C9
Environmental information on page 114
© Copyright 2022 ABB. All rights reserved.
for specification of allergenic materials
1 Safety
Continued
15