Replacement Of The Actuator - ABB GWT C9 Product Manual

5 Repair

5.6 Replacement of the actuator

5.6 Replacement of the actuator
Introduction
Read the introduction section before performing any service work (see
on page
Required equipment
Qty
1
1
Procedure
1
2
3
Continues on next page
90
75).
Equipment
Standard toolkit
Hot air gun
Action
Remove the protective cover.
Open movable gun arm to large opening
position, with the actuator rod fully retrac-
ted inside the actuator.
Loosen all the connecting media (power
cable, and temperature sensor).
© Copyright 2022 ABB. All rights reserved.
Product (example)
See Standard toolkit on page
See Special tools on page
Illustration
See Remove/reassemble the protective
cover on page 79.
xx2200000334
See Connecting electricity and media on
page 59.
Product manual - GWT C9
3HAA010198-001 Revision: A
Introduction
120.
122.