Replacement Of The Leaf Shunts - ABB GWT C9 Product Manual

5.5 Replacement of the leaf shunts

Introduction
Read the introduction section before performing any service work (see
on page
Required equipment
Qty
1
1
1
Procedure
1
2
Product manual - GWT C9
3HAA010198-001 Revision: A
75).
Equipment
Standard toolkit
Scotch brite wheel
Hand drill machine
Action
Remove the protective cover.
Open movable gun arm to large opening
position, with the actuator rod fully retrac-
ted inside the actuator.
© Copyright 2022 ABB. All rights reserved.
5.5 Replacement of the leaf shunts
Product (example)
See Standard toolkit on page
See Special tools on page
See Special tools on page
Illustration
See Remove/reassemble the protective
cover on page 79.
xx2200000334
Continues on next page
5 Repair
Introduction
120.
122.
122.
87