Dpo On/Off-Direct Power On; Std-Standby Mode - Christie APS Series Technical Reference

Commands
Command Description
SHP+/- Adjusts the sharpness.
Examples
Add one to the sharpness data:
SHP+
Subtract one from the sharpness data:
SHP-
DPO ON/OFF–Direct Power On
Automatically turns on the projector when electrical power is connected.
Commands
Command Description
DPO <value> Automatically turns on the projector when
electrical power is connected.
Examples
Switch Direct power on to On:
DPO ON
Switch Direct power on to Off:
DPO OFF
STD–Standby Mode
Sets the projector's Standby mode.
Commands
Command Description
STD <value> Sets the projector's Standby mode.
Examples
Set the Standby mode to Normal:
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright 2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Value
—
Value
OFF = Disables auto power up (Default)
ON = Enables auto power up
Value
0 = ECO
1 = Network
2 = Normal
Serial API commands
17