Table of Contents
Advertisement
4. Placing the projector
Read this chapter through fi rst. Then install the projector into place.
4.1 Installation environment
This product requires an installing place that is stable, cool and airy. Check your
installation environment in accordance with the following.
WARNING
● Do not place the product on an unstable surface such as an uneven, tilted, or vibrating
place.
● Do not place the product near water - for example, near a bathtub, washbowl, kitchen
sink, or laundry tub; in a wet basement, near a swimming pool, beach; or outdoors.
CAUTION
● Do not place the product in a dusty, smoky, or humid place - for example, on a
passage, in a smoking space, in a kitchen, or outdoors.
● Do not place the product near heat sources - for example, radiators, heat registers,
stoves, or other product (including amplifiers) that produces heat.
● Do not place this product in a magnetic field.
NOTICE
● Do not place the product in a place where radio interference may be caused.
● Do not place the projector in a place where any strong lights hit the remote sensors.
4.2 Projection style
Choose the projection style suitable to your use, referring to the illustration below.
NOTE
* For the case of installation in a special state such as ceiling mount, the specified
mounting accessories and service may be required. Before installing the projector,
consult your dealer about your installation.
WARNING
● Consult with your dealer about installation beforehand.
● Use only the mounting accessories the manufacturer specified, and leave installing and
removing the projector with the mounting accessories to the service personnel.
● Read and keep the user's manual of the mounting accessories used.
LX750/LW650/LS+700 User Manual-Concise
(2) Ceiling mount (suspended from a
(2) Ceiling mount (suspended from a ceiling)
(1) Standard style (placed on a ta
(1) Standard style (placed on a table)
6
020-000158-01 Rev. 1 (03-2009)
Advertisement
Table of Contents
