Table of Contents
Advertisement
10. Connect the SID module cable to the power switch/SID module connector.
11. Install the fan cage.
12. Do one of the following:
•
Install the air baffle.
•
Perform steps 9–13 of "Installing a midplane 4LFF SAS/SATA drive cage".
13. Install the access panel.
14. Slide the server into the rack.
15. Connect each power cord to the server.
16. Connect each power cord to the power source.
17. Power up the server.
The installation is complete.
Installing a FlexibleLOM adapter
Prerequisites
•
The components included with the hardware option kit
•
A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure
1.
Power down the server.
2.
Do one of the following:
Hardware options installation
143
Advertisement
Table of Contents
