Table of Contents
Advertisement
Procedure
1. Observe the following alert.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC
power cords before removing or installing the PCI riser cage.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
•
Extend the server from the rack.
Remove the server from the rack.
•
5. Remove the access panel.
6. Remove the rear wall blanks.
Hardware options installation
124
Advertisement
Table of Contents
