Midplane box (LFF only)
Item
Description
1
Box 7
Drive bay numbering
Drive bay numbering depends on how the drive backplanes are connected:
•
To a controller
◦
Embedded controllers use the onboard SATA ports.
◦
Type-a controllers install to the type-a smart array connector.
◦
Type-p controllers install to a PCIe riser.
•
To a SAS expander
Installs in the primary or secondary PCIe riser
Drive bay numbering: Smart Array controller
When the drive backplane is connected directly to a storage controller, then each drive box starts at 1. The following
images are examples of common configurations.
32
Component identification