Table of Contents
Advertisement
4.
Place the server on a flat, level work surface.
5.
Remove the access panel.
6.
Remove all components necessary to access the DIMM slots.
7.
Install the HPE Persistent Memory module.
8.
Install any components removed to access the DIMM slots.
9.
Install the access panel.
10. Slide or install the server into the rack.
11. If removed, reconnect all power cables.
12. Power up the server.
13. Configure the server for HPE Persistent Memory.
For more information, see Configuring the server for HPE Persistent Memory.
Configuring the server for HPE Persistent Memory
After installing HPE Persistent Memory modules, configure the server for HPE Persistent Memory.
IMPORTANT: Always follow recommendations from your software application provider for high-availability best
practices to ensure maximum uptime and data protection.
A number of configuration tools are available, including:
•
UEFI System Utilities—Access System Utilities through the Remote Console to configure the server by pressing the F9
key during POST.
•
iLO RESTful API—Use the iLO RESTful API through tools such as the RESTful Interface Tool (ilorest) or other third-
party tools.
•
HPE Persistent Memory Management Utility—The HPE Persistent Memory Management Utility is a desktop
application used to configure the server for HPE Persistent Memory, as well as evaluate and monitor the server
memory configuration layout.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/persistentmemory-docs).
Hardware options installation
92
Advertisement
Table of Contents
