Table of Contents
Advertisement
c. Lift the processor heatsink assembly and move it away from the system board.
d. Turn the assembly over and place it on a work surface with the processor facing up.
e. Install the dust cover.
8.
Separate the processor from the heatsink:
a. Locate the release slot between the frame and heatsink.
The release slot is across from the Pin 1 indicator and is labeled with a screwdriver.
b. Insert a 1/4" flathead screwdriver into the release slot.
Be sure that the screwdriver is between the plastic frame and the heatsink.
c. To lift the processor frame away from the heatsink, slowly rotate the screwdriver.
d. Unlatch the remaining corners of the frame.
e. Separate the frame from the heatsink.
Hardware options installation
147
Advertisement
Table of Contents
