Installing A Front 8Sff Sas/Sata Drive Cage In Box 2 - HPE ProLiant DX380 Gen10 User Manual

Installing a front 8SFF SAS/SATA drive cage in box 2

Procedure
1. Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
Extend the server from the rack.
•
Remove the server from the rack.
•
4. Remove the access panel.
5. Remove the air baffle.
6. Remove the fan cage.
7. Remove the bay blank.
8. Install the 8SFF front drive cage option.
Hardware options installation
105