Table of Contents
Advertisement
7.
Install the access panel.
8.
Install the server in the rack.
9.
Connect each power cord to the server.
10. Connect each power cord to the power source.
11. Power up the server.
The installation is complete.
Installing the Systems Insight Display
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
The components included with the hardware option kit
•
T-10 Torx screwdriver
Procedure
1.
Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
Hardware options installation
141
Advertisement
Table of Contents
