Table of Contents
Advertisement
Product
HPE ProLiant DX380 Gen10 Server system ROM
HPE Smart Array SR controllers
HPE Smart Array MR controllers
Installing an energy pack option for HPE Smart Storage
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
T-10 Torx screwdriver
•
The components included with the hardware option kit
Procedure
1.
Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
4.
Remove the access panel.
5.
Remove the air baffle.
6.
Remove the fan cage.
7.
Install the energy pack option.
Minimum firmware version
2.00
1.90
24.23.0-0041
Hardware options installation
75
Advertisement
Table of Contents
