Connect Rrv934 Multi-Controller - Siemens Synco living QAX913 Mounting And Commissioning

The DELTA reflex smoke detector is automatically switched on as soon as the
inserted batteries supply power. Insert the batteries on site and when the
smoke detector has assumed its future operating temperature.
For detailed information, see the documentation supplied with the
smoke detector.
The smoke detector is connected by pressing the test button on the front of
the detector for at least 2 seconds and then pressing the binding button at the
rear for at least 1 second. The LED at the rear blinks several times.
To confirm successful connection, the central apartment unit beeps.
The smoke detector must have smoke detector module wave
UNI M 255. For detailed information, see the documentation for
GAMMA wave products.

Connect RRV934 multi-controller

The multi-controller is automatically switched on as soon as power is applied.
The LEDs are tested. All LEDs light up for one second. The mains LED lights
up when the unit is ready to operate.
If at this point no multi-controller channel is connected, the binding LED
flashes.
Pressing the binding button displays the state of the individual chan-
nels. The LEDs of the channels already connected light up while the
LEDs of the non-connected channels remain dark. When releasing the
button, the multi-controller returns to normal operation after 7 seconds.
When one of the channels is selected, the binding LED indicates the
state of the respective channel/channel group.
Front of RRV934 multi-controller
= LED and function button to test connection, for binding and factory setting
CH = Channel selection button
U = LEDs for 0..10 V universal output channels
X = LEDs for universal input channels
Q = LEDs for universal relay output channels
The multi-controller is connected by channel or channel group.
Siemens
Building Technologies
Synco™ living
Commissioning the system
65 / 134
CE1C2740en
13.12.2010