Unit Factor - Siemens Synco living QAX913 Mounting And Commissioning

Main menu > Commissioning > Extra configuration
> Meter > ... > Impulse sensor type:
Reed contact
with namur
Reed contact

Unit factor

The unit for the conversion factor required for correct meter display is set via
the unit factor when connecting the meter via an impulse input.
Setting
Wh
Wh x 10
Wh x 100
kWh
kWh x 10
kWh x 100
MWh
kJ
kJ x 10
kJ x 100
MJ
MJ x 10
MJ x 100
GJ
ml
ml x 10
ml x 100
Liter
Liter x 10
Liter x 100
m3
No unit
The setting range for the unit factor is limited to meaningful values
and depends on the meter type or medium.
Siemens
Building Technologies
Meter is connected via Reed contact with Namur wiring.
Impulse sensor contacts with Namur wiring offer the ad-
vantage of monitoring the meter for interruption or short-
circuit.
Meter is connected via Reed contact (factory setting).
Central apartment unit display
8 8 8 8 8 8 8 8 Wh
8 8 8 8 8 8 . 8 8 kWh
8 8 8 8 8 8 8 . 8 kWh
8 8 8 8 8 8 8 8 kWh
8 8 8 8 8 8 . 8 8 MWh
8 8 8 8 8 8 8 . 8 MWh
8 8 8 8 8 8 8 8 MWh
8 8 8 8 8 8 8 8 kJ
8 8 8 8 8 8 . 8 8 MJ
8 8 8 8 8 8 8 . 8 MJ
8 8 8 8 8 8 8 8 MJ
8 8 8 8 8 8 . 8 8 GJ
8 8 8 8 8 8 8 . 8 GJ
8 8 8 8 8 8 8 8 GJ
8 8 8 8 8 8 8 8 ml
8 8 8 8 8 8 . 8 8 l
8 8 8 8 8 8 8 . 8 l
8 8 8 8 8 8 8 8 l
3
8 8 8 8 8 8 . 8 8 m
3
8 8 8 8 8 8 8 . 8 m
3
8 8 8 8 8 8 8 8 m
8 8 8 8 8 8 8 8
Synco™ living
Commissioning the system
55 / 134
CE1C2740en
13.12.2010