Connect Meter; Connect Wri982 Consumption Data Interface - Siemens Synco living QAX913 Mounting And Commissioning

Main menu > Commissioning > RF connections
> Switching group relay > Switching group X > Connect device:
The following device channels can be connected:
• Universal relay output Qx of a multi-controller (see page 65).
• Universal relay output Qx of a heating circuit controller (see page 62).

Connect meter

Inform the central apartment unit that you want to use pulse input Px or M-bus
input Mx of a consumption data interface WRI982 to connect a meter:
Main menu > Commissioning > RF connections
> Meter > ... > Connect device:
Confirm subentry "Connect device" by pressing the Menu/ok button. To con-
nect press the binding button on the device to be connected.

Connect WRI982 consumption data interface

The consumption data interface is automatically switched on as soon as
power is applied.
The LEDs are tested. All LEDs light up for one second. The mains LED lights
up when the unit is ready to operate.
If at this point no consumption data interface channel is connected, the bind-
ing LED flashes.
When you press the binding button, the state of the individual channels
is indicated. The LEDs of the channels already connected light up
while the LEDs of the non-connected channels remain dark. When re-
leasing the button, the consumption data interface returns to normal
operation after 7 seconds. When a channel is selected, the binding
LED indicates the status of the respective channel.
WRI982 consumption data interface display
= LED and function button to test connection, for binding and factory setting
CH = Channel selection button
P = LEDs for pulse input channels
M = LEDs for M-bus channels
Siemens
Building Technologies
Synco™ living
Commissioning the system
73 / 134
CE1C2740en
13.12.2010