Configure Doors (Qax913 Only); Configure Meter; Synergyr - Siemens Synco living QAX913 Mounting And Commissioning

---
Via RF
Q1 (local)

Configure doors (QAX913 only)

The QAX913 central apartment unit can monitor up to two doors and display
their status on the info page.
A name can be assigned to each door.
Main menu > Commissioning > Basic configuration
> Doors > Door X > Door X:
Activate a door by setting the function to "Active":
Main menu > Commissioning > Basic configuration
> Doors > Door X > Function:
---
Active

Configure meter

The central apartment unit can display consumption data from various meter
types and provide them for readout.

Synergyr

When partially migrating a Synergyr plant (replace WRV8x or WRI80), the me-
ter data can be sent to the Synergyr OZW30 unit via the Synergyr building
bus.
Activate communication with the Synergyr unit by setting Synergyr to "Active":
Main menu > Commissioning > Basic configuration
> Meter > Synergyr:
---
Active
Siemens
Building Technologies
Inactive – no switching group relay required
(factory setting).
Relay output Qx of an RRV91... heating circuit controller
or RRV934 multi-controller used as a switching group relay.
Relay output Q1 of the central apartment unit used as a
switching group relay.
Inactive – Door contact not needed (factory setting).
Door to be monitored via door contact.
Inactive – no Synergyr unit available (factory setting).
Communication with Synergyr unit active.
Synco™ living
Commissioning the system
31 / 134
CE1C2740en
13.12.2010