Configure Switching Groups (Qax913 Only) - Siemens Synco living QAX913 Mounting And Commissioning

Configure switching groups (QAX913 only)

Lighting and blinds control as well as scenes and info pages are operated via
switching groups.
8 switching groups are available. Switching groups 1 – 4 can also be operated
via softkey pairs 1 – 4 of the QAX913 central apartment unit. Switching
groups 5 – 8 are always operated via the relevant operating lines.
1A, 1B Softkeys for switching group 1
2A, 2B Softkeys for switching group 2
3A, 3B Softkeys for switching group 3
4A, 4B Softkeys for switching group 4
To be able to assign devices for lighting and blinds control, scenes or info
pages to switching groups, the latter must be given names and be activated.
Assign an unambiguous name to a switching group.
Main menu > Commissioning > Basic configuration
> Switching groups > Switching group X > Switching group X:
A switching group is activated as soon as a function other than "---" is se-
lected.
Main menu > Commissioning > Basic configuration
> Switching groups > Switching group X > Function:
--- Inactive – all relevant switching group information and op-
erating lines are hidden.
Switch Control of switching and/or dimming devices, switching
group relays plus RF adapter plugs KRF96
Dim Control of dimming devices and RF adapter plugs KRF961.
Blind Control of blinds devices.
Scene Control of scene-compatible switching, dimming and blinds
devices plus RF adapter plugs KRF96...
Info For direct selection of info pages via the softkeys; only
available with switching groups 1 – 4.
Siemens
Building Technologies
Synco™ living
Commissioning the system
...
29 / 134
CE1C2740en
13.12.2010