Operating Example For Use Of The Logo! Display And Logo! Tde: Central Blind Control; Activating The Panic Function For The Lights - Siemens LOGO! 8 Manual

4 Operating the Application Example
4.2.1 Operating example for use of the LOGO! display and LOGO! TDE:
Central blind control
Table 4-2
No.
1. Use the cursor keys to go to the blind control menu.
Press ESC+ C1▲.
2.
→ All blinds move up.
3. While the blinds travel upwards, press ESC+C2▼.
→ The blinds are stopped.
Now press ESC+C2▼(0.5 seconds).
4.
→ The blinds now move downwards again, i.e. in
reverse direction.
4.3

Activating the panic function for the lights

Table 4-3
No.
1. Press one of the light buttons in the house for more
than 3 seconds.
→ All lights in the house and the exterior lighting are
switched on. In addition, a warning message is
displayed on the LOGO! display and on the
LOGO! TDE.
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2,
Action/response
Action/response
09/2018
LOGO! display and LOGO! TDE
LOGO! display and LOGO! TDE
33