Mounting Procedure; Mounting Method / Knockout Holes; Holes; Remove The Electronics Section From The Base - Siemens Synco living QAX913 Mounting And Commissioning

Mounting procedure

Mounting method / knockout holes

The base of the central apartment unit can be mounted directly on the wall or
on a recessed conduit box. It has an opening at the rear and 2 knockout holes
(one at the top and one at the bottom). If required, the hole(s) must be
knocked out before securing the base to the wall.

Holes

Secure the base to the wall with at least 3 screws. To determine the positions
of the holes in the wall, hold the base horizontally against the wall and mark
the required positions.

Remove the electronics section from the base

Insert a screwdriver (size 3)
in the first and then in the
second slot at the bottom of
the unit, slightly push it and
then turn to unlock.
14 / 134
Siemens
Building Technologies
Synco™ living
Mounting and installation
CE1C2740en
13.12.2010