Connect Input For Dew Point; Connect Input For Absence; Connect Input For Twilight (Qax913 Only); Connect Outputs - Siemens Synco living QAX913 Mounting And Commissioning

Connect input for dew point

Inform the central apartment unit that you want to use an input to connect a
dew point monitor contact:
Main menu > Commissioning > RF connections
> Inputs > Dew point > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-controller (see page 65).

Connect input for absence

Inform the central apartment unit that you want to use an input to connect an
absence contact:
Main menu > Commissioning > RF connections
> Inputs > Absence > Connect device:
The following device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-controller (see page 65).

Connect input for twilight (QAX913 only)

Inform the QAX913 central apartment unit that you want to connect an input to
connect a twilight switch:
Main menu > Commissioning > RF connections
> Inputs > Twilight > Connect device:
The following devices or device channels can be connected:
• Universal input B of a heating circuit controller (see page 62).
• Universal input Xx of a multi-controller (see page 65).
• Door/window contact wave AP 260 (see page 64).

Connect outputs

Connect output for heat demand DC 0..10 V
Inform the central apartment unit that you want to connect the heat demand
output 0..10 V:
Main menu > Commissioning > RF connections
> Outputs > Heat demand DC 0...10 V > Connect device:
The following device channels can be connected:
• Universal input U of a heating circuit controller RRV912 (see page 62).
• Universal output U of a multi-controller (see page 65).
Siemens
Building Technologies
Synco™ living
Commissioning the system
79 / 134
CE1C2740en
13.12.2010