Adjusting Lens Position; Saving Lens Setting; Applying The Previous Lens Setting; Locking The Lens Motor - Christie HS Series User Manual

Adjusting lens position

Shift the lens to the specific position.
1. Display an image or test pattern that can be used to analyze image location.
2. Press LENS on keypad or LENS H/LENS V on remote control.
You can also select Menu > Configuration > Lens Settings > Lens Shift.
3. Use the arrow keys to adjust the lens position.
4. To exit the menu, press EXIT.

Saving lens setting

Save the lens position, zoom and focus. One projector can save maximum up to five lens settings.
1. Select Menu > Configuration > Lens Settings > Lens Memory > Save Current Settings.
2. To save the lens setting, select an empty record.
3. To confirm the selection, press ENTER.

Applying the previous lens setting

Apply the previous lens setting.
1. Before applying the previous lens setting, you must save the lens setting.
See Saving lens setting
2. Select Menu > Configuration > Lens Settings > Lens Memory > Apply Position.
3. To apply specific lens setting, select the required record.
4. To confirm the selection, press ENTER.

Locking the lens motor

Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out
any changes and overriding all other lens features. This feature prevents accidental lens position
changes in multiple projectors installations.
1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.
2. To enable locking of all lens motors, select Locked.
3. To unlock all lens motors, select Allow.
4. To confirm the selection, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
on page 47 for further details.
Configuring system settings
47