Aligning The Image With Zoom And Focus; Adjusting Lens Position; Saving Lens Setting; Applying Lens Setting - Christie HS Series User Manual
Hide thumbs
Also See for HS Series:
- Service manual (112 pages) ,
- User manual (73 pages) ,
- Product safety manual (57 pages)
Table of Contents
Advertisement
Aligning the image with zoom and focus
Ensure that the image reflected from the digital micromirror device (DMD) is parallel and centered
with the lens and screen.
1. Display an image or test pattern that can be used to analyze image focus and geometry.
2. Select Zoom on keypad or remote control.
3. You can also select Menu > Configuration > Lens Settings > Zoom.
4. Use the up and down arrow keys to zoom in or out of the image.
5. To exit the menu, press EXIT.
6. Select Focus on keypad or remote control.
You can also select Menu > Configuration > Lens Settings > Focus.
7. Use the up and down arrow keys to adjust the focus of the image.
8. To exit the menu, press EXIT.
9. To refine your adjusts, repeat steps 2 to 7.
Adjusting lens position
Shift the lens to the specific position.
1. Display an image or test pattern that can be used to analyze image location.
2. Press LENS on keypad or LENS H/LENS V on remote control.
3. You can also select Menu > Configuration > Lens Settings > Lens Shift.
4. Use the arrow keys to adjust the lens position.
5. To exit the menu, press EXIT.
Saving lens setting
Save the lens position, zoom and focus. One projector can save maximum up to five lens settings.
1. Select Menu > Configuration > Lens Settings > Lens Memory > Save Current Settings.
2. To save the lens setting, select an empty record.
3. To confirm the selection, press ENTER.
Applying lens setting
Apply the previously saved lens setting to the projector.
1. Before applying the previous lens setting, you need to save the lens setting.
See
Saving lens setting
2. Select Menu > Configuration > Lens Settings > Lens Memory > Apply Position.
3. To apply specific lens setting, select the required record.
HS Series D16-20 User Manual
020-001466-01 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
on page 45 for further details.
Configuring system settings
45
Advertisement
Table of Contents
