Table of Contents
Advertisement
18.6 Ethernet link configuration
Direct connection usage
Remote connection usage
User's Manual
The ProMax unit is connected to the PC and can be
controlled with the Dimaxis Pro/Classic imaging software
(from the software version 3.2.3). In this case an Ethernet
Crossover cable (10009912) is used to connect the
ProMax to the PC.
The ProMax unit is connected to the 10/100 Base network
and used from a Remote PC with the Dimaxis imaging
software. In this case a UTP cat5e cable (0630200600) is
used to connect the ProMax to the 10/100 Base Network.
The Remote PC is connected to the Base Network with a
10/100 Base UTP connection cable to the Ethernet card
of the PC.
Depending on the connection usage the Interconnection
cable (06320060) or the Ethernet Crossover cable
(100009912) is attached to the left terminal (marked
"ETHERNET") at the underside of the stationary column
top.
marked
"ETHERNET"
TECHNICAL SPECIFICATIONS
ProMax X-ray unit with Dimax3 109
Advertisement
Table of Contents
