Switching The Unit On - Planmeca ProMax X-ray User Manual

4

SWITCHING THE UNIT ON

Stationary column top
User's Manual
On/off switch
NOTE
NOTE
The on/off switch is located on the underside of the
stationary column top. When you switch the unit on the
main display will be shown on the control panel and the
unit will carry out a self-test which will last a few seconds.
The unit is then ready for use.
The unit incorporates a self-checking feature that
monitors the operation of the unit. If there is a
malfunction or an operating error the unit will
stop working and an error message will appear
on the control panel. The error message must be
cleared from the display before the unit can be
used again. To clear the message, touch the OK
field.
A help message is shown on the control panel if
the selected function is not allowed. The help
message disappears when you cancel the action
or release the exposure button.
ProMax X-ray unit with Dimax3 9
SWITCHING THE UNIT ON