Programming Quick Button Values - Planmeca ProMax X-ray User Manual

8.1.2

Programming quick button values

1
3
User's Manual
The following display appears.
Select the correct kV and mA values for the patient being
X-rayed according to the build of the patient. Alternatively
you can select one of the quick buttons on the bottom of
the Select kV/mA display.
The exposure values for the exposure programs are given
in their corresponding chapters.
Confirm the selection and return to the main display by
touching OK.
You can use the quick buttons on the bottom of the Select
kV/mA display. The quick button values have been preset
at the factory but you can reprogram the values.
Select first the kV (1) and mA (2) values by touching the
corresponding fields and touch the desired quick button
(3) until you hear a signal tone. By doing this the kV and
mA values will be changed for the quick button.
Confirm the selection and return to the main display by
touching OK.
ProMax X-ray unit with Dimax3 35
CONTROL PANEL
2