Lubrication - PRONAR RC3100 Operator's Manual

Section 5

5.18 LUBRICATION

• Trailer lubrication should be per-
formed with the aid of a manually or
foot operated grease gun, filled with
recommended grease. Before com-
mencing work insofar as is possible
remove old grease and other contam-
ination. After completed lubrication,
wipe off excess grease.
• Parts to be lubricated with machine
oil should be wiped with dry clean
cloth. Apply oil to their surfaces using
a brush or oil can. Wipe off excess
oil.
• Change of grease in hub bearings
should be made at specialised service
Table 5.4 Lubricants
Item Symbol
1 A machine general-purpose grease (lithium, calcium grease),
permanent grease for heavily loaded elements with addition of MoS
2 B
graphite
3 C anticorrosion preparation in aerosol
4 D ordinary machine oil, silicon grease in aerosol
TIP
Lubrication frequency (see table Trailer lubrica-
tion schedule):
D - working day (8 hours of trailer use)
M - month
5.22 PRONAR RC3100
Technical inspection schedule
points, equipped with the appropriate
tools. In order to conduct this lubri-
cation, the complete hub should be
disassembled as well as bearings
and individual sealing rings should
be removed. After careful washing
and inspection, mount lubricated el-
ements. If necessary, bearing and
seals should be replaced with new
ones.
• Empty grease or oil containers
should be disposed of according to
the recommendations of the lubricant
Manufacturer.
Description
or
2