Table of Contents
Advertisement
SECTION 5
TAB. 5.2
List of bulbs
LAMP
Rear left lamp assembly
Rear right lamp assembly
Licence plate illumination
light
Front parking light
Rear clearance lamp
5.6 TRAILER LUBRICATION
Trailer lubrication should be performed with the aid of a manually or foot operated grease
gun, filled recommended grease. Before commencing work insofar as is possible remove old
grease and other contamination. Remove and wipe off excess oil or grease.
Parts, which should be lubricated with machine oil, should be wiped with dry cleaning cloth
and then a small quantity of oil should be applied do surfaces (with oil can or brush). Wipe off
excess oil.
Change of grease in hub bearings should be entrusted to specialised service points,
equipped with the appropriate tools. According to the recommendations of the axle
Manufacturer, dismantle the entire hub, remove the bearing and individual sealing rings. After
careful washing and inspection mount lubricated elements. If necessary, bearing and seals
should be replaced with new parts. Lubrication of axle bearings shall be performed at least
once in 2 years or every 50 000 km. In the event of intensive use, lubrication should be
performed more frequently.
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
LAMP TYPE
WE 549L
WE 549P
LT-120
LO-110PP
127 021 00 00
5.23
BULB / QUANTITY
IN 1 LAMP
R10W / 1 unit
P21W / 2 units
R10W / 1 unit
P21W / 2 units
C5W / 1 unit
C5W / 1 unit
R5W / 1 unit
Pronar T683
NUMBER
OF
LAMPS
1
1
2
2
2
Advertisement
Table of Contents
