Lubrication - PRONAR T780 Translation Of The Original Instructions

oil with skin wash the place of contact with water and soap. Do not apply organic solvents
(petrol, kerosene). Contaminated clothing should be changed to prevent access of oil to skin.
In the event of contact of oil with eye, rinse with large quantity of water and in the event of the
occurrence of irritation consultant a doctor. Hydraulic oil in normal conditions is not harmful to
the respiratory tract. A hazard only occurs when oil is strongly atomised (oil vapour), or in the
case of fire during which toxic compounds may be released. Oil fires should be quenched
with the use of carbon dioxide, foam or extinguisher steam.

5.6 LUBRICATION

Trailer lubrication must be carried out in places indicated in figures (5.6A) & (5.7A), and also
detailed in table (5.4).
TABLE 5.4 GREASING POINTS
ITE
NAME
M
Articulated joints and
1 sockets for installation of
load box.
Sockets for installation of
2
tipping ram cylinder
3 Absorber spring pins
4 Rocker arm pins
Absorber spring sliding
5
surfaces
6 Axle bearings
Axle expander shaft
7
sleeves
8 Absorber spring
Wall extension hinges and
9
wall locks
10 Handbrake mechanism
NUMBER OF
GREASING
POINTS
4
2
4
2
4
4
4
anticorrosion
4
and penetration
10
1
5.11
TYPE OF
GREASE
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
permanent
GREASING
FREQUENCY
2 months
6 months
6 months
6 months
1 month
24 months
6 months
6 months
1 month
6 months