Information And Warning Decals - PRONAR RC3100 Operator's Manual

Safety advice

2.9 INFORMATION AND WARNING DECALS

The machine is labelled with the infor-
mation and warning decals mentioned in
table 2.1. Throughout the time it is in use,
the user of the machine is obliged to take
care that notices and warning and infor-
mation symbols located on the machine
are clear and legible. In the event of their
destruction, they must be replaced with
new ones. Safety decals can be purchased
Table 2.1 Information and warning decals
Item
1 Permissible hitching system loading.
Regularly lubricate the trailer according to the lubrication sched-
2
ule.
Regularly check if the nuts and bolts fixing the wheels and other
3
components are properly tightened.
Marking of mounting points for belts, ropes, chains or other de-
4
vices for securing load on the platform.
5 Manufacturer's decal.
6 Air pressure in the tyres
7 Hydraulic winch operation information decal.
8 Machine type label.
Caution! Before starting work, carefully read the Operator's
9
Manual.
Before repairs, maintenance activities or other servicing activi-
10
ties, turn off engine and remove key from ignition
Air pressure in tyres depends on tyres used
(1)
from the Manufacturer of the machine or
your PRONAR dealer. New assemblies,
changed during repair, must be labelled
once again with the appropriate safety
signs. During machine cleaning do not use
solvents which may damage the coating
of information label stickers and do not
subject them to strong water jets.
Description
- standard tyres.
(1)
.
Part number
103N-00000002
104N-00000004
104N-00000006
123N-00000013
187N-00000016
208N-00000006
208N-00050004
621N-65000001
70N-00000004
70N-00000005
F.3.1.209.09.1.EN
PRONAR RC3100
Section 2
2.15