Maintenance
which toxic compounds may be released.
Oil fires should be quenched with the use
of carbon dioxide, foam or steam extin-
guishers. Do not use water to quench oil
fires.
For heavily loaded parts it is recom-
mended to apply lithium greases with ad-
dition of molybdenum disulphide (MOS
or graphite. In the case of less loaded
sub-assemblies the application of general
purpose machine greases is recom-
mended, which contain anticorrosion ad-
ditives and have significant resistance
to being washed away by water. Aerosol
Table 6.2
Lubricants
Item Symbol
1
A
machine general-purpose grease (lithium, calcium grease),
2
B
Grease for heavily loaded elements with addition of MoS
3
C
anticorrosion preparation in aerosol
4
D
ordinary machine oil, silicon grease in aerosol
preparations (silicon greases and anti-
corrosive-lubricating substances) should
have similar characteristics.
Before using the grease, read its infor-
mation leaflet. Particularly relevant are
safety rules and handling procedures for
LUBRICANTS
a given lubricant as well as waste disposal
procedure (used containers, contaminated
rags etc.). Information leaflet (material
)
safety data sheet) should be kept together
2
with grease.
Description
TIP
Lubrication frequency (see table: Trailer lubrication
schedule):
PRONAR RC3100
Section 6
or graphite
2
J.3.1.526.05.1.EN
6.11