Table of Contents
Advertisement
Design and operation
wall to which spare wheels (11) (optional
equipment) are attached. Optional winch
(17) with hydraulic drive system is installed
behind the front wall - figure (3.1).
On the left side, between the under-run pro-
tective device (7) and floor surface, there
is a holder (8) for storing planks which are
used for widening the load platform (12) –
figure (3.1).
In the front part of the trailer, there is
a drawbar (1) with shock absorbing
springs (2) – figure (3.2). Drawbar hitching
eye (3) is bolted to the drawbar faceplate.
Depending on configuration, K80 ball
drawbar, fixed drawbar with a 50mm eye,
fixed drawbar with a 40mm eye or rotating
drawbar with a 50mm eye can be used.
On the left side of the drawbar, there is
a parking stand (4) (mechanical or hy-
draulic stand). On the upper profile of the
drawbar there is a bracket for conduit con-
nectors (5).
The trailer can be additionally equipped
with a hubodometer (21) mounted on the
middle or first axle, on the right side.
PRONAR RC3100
Section 3
G.3.1.621.02.1.EN
3.5
Advertisement
Table of Contents
