Hydraulic Support Operation - PRONAR RC3100 Operator's Manual

Section 4

4.4 HYDRAULIC SUPPORT OPERATION

SETTING THE SUPPORT TO DRIVING
• Immobilise tractor and trailer with
parking brake.
The trailer must be hitched to
the tractor. Hydraulic conduit
marked with decal (7) must
be connected to the hydraulic
socket in tractor.
2
B
A
3
1
Figure 4.5 Support operation
(1) support in parking position
(4) cotter pin of pin
(6) information decal "O/Z" (Opened/Closed)
(A), (B) safety pin position
4.8 PRONAR RC3100
POSITION
4
5
(2) support in driving position
(5) cut-off valve
• Open the valve (5) by moving the
valve lever to the open position "O"
- decal (6).
• Operate the hydraulic distributor
in the tractor in order to raise the
support foot.
• Lock the support by moving the valve
lever (5) to the closed position "Z" –
decal (6).
O
O
Z
Z
7
(3) safety pin
(7) information decal
Correct use
6
6
621-H.05-1