Securing Load - PRONAR RC3100 Operator's Manual

Section 4

4.9 SECURING LOAD

Figure 4.13 Fixing lugs
(1) fixing eye
(4) information decal
Regardless of the type of load carried, the
user is obliged to secure it in such a manner
that the load is unable to move freely on
the load platform and pose a threat to
other road users during transport.
The load must be properly secured against
moving by means of straps, ropes, chains
or other securing measures fitted with
a tightening mechanism. The extent of
protection depends on loading method,
type of load and size of load. If load is to
be transported on slopes and/or in strong
gusty winds conditions, limit the load
height according to existing conditions.
Regardless of the type of load carried,
4.22 PRONAR RC3100
1
1
(2) load catch (3) limiter
the user is obliged to secure it in such
a manner that the load is unable to spread
and cause contamination of the road.
It is impossible to describe all methods of
loading due to the diversity of materials,
tools, means of fixing and securing a load.
While working be guided by caution and
own experience. The trailer user must
carefully read the regulations concerning
road transport and comply with them.
In the front of the low chassis trailer's floor
there is a fixing eye (1) for securing loads.
On the extreme longitudinal members of
the floor and in the ramp sheathing there
are sockets in which load catches (2) for
Correct use
2
3
4
621-H.12-1