Table of Contents
Advertisement
Safety advice
other people's health and life at
risk, and also damage the machine
and invalidate the guarantee.
• Before welding or electrical work,
the trailer should be disconnected
from the power supply. The paint
coating should be cleaned. Burning
paint fumes are poisonous for
people and animals. Welding work
should be carried out in a well lit
and well ventilated space.
• During welding work, pay attention
to flammable or fusible elements
(parts of the pneumatic, electric
and
hydraulic
parts). If there is a risk that they
will catch fire or be damaged, they
should be removed or covered with
non-flammable
commencing welding work. Before
beginning work, prepare a CO
foam extinguisher.
• In the event of work requiring the
trailer to be raised, use properly
certified hydraulic or mechanical
lifts for this purpose. After lifting the
machine, stable and durable sup-
ports must also be used. Work must
not be carried out under a trailer,
which has only been raised with
a lift or jack.
• The trailer must not be supported
systems,
plastic
material
before
or
2
using fragile elements (bricks or
concrete blocks).
• The lifting jack should have suf-
ficient lifting capacity and should
be technically reliable. The lifting
jack must be positioned on a level
and hard surface so as to prevent
sinking into the ground or relocating
the jack during lifting. If necessary,
use proper backing plates in order
to reduce unit pressure of the jack's
base on the ground and prevent its
sinking into the ground.
• After completing work associated
with lubrication, remove excess
oil or grease. The trailer should be
kept clean and tidy.
• The user must not repair by himself
the components of the hydraulic
or pneumatic system i.e. control
valves, modules, cylinders and reg-
ulators. In the event of damage to
these elements, repair should be
entrusted to an authorised service
point or elements should be re-
placed with new ones.
• Do NOT install additional appli-
ances or fittings not according to
the specifications defined by the
Manufacturer.
• The trailer may only be towed when
axles and wheels, lighting system
PRONAR RC3100
Section 2
2.7
Advertisement
Table of Contents
