PRONAR RC3100 Operator's Manual page 79

Correct use
fastening loads are located - figure (4.12).
The optimum angle for attaching securing
measures is 30 . Increased load applied
O
to fixing lug or wrong attaching angle may
cause damage to fixing lug and lead to re-
location of load.
To limit the load space, limiters (additional
equipment) can be used - figure (4.14).
The position of the limiter body (1) on the
platform can be changed by locking its po-
sition in the floor sockets (2).
1
2
Figure 4.14 Limiter
(1) limiter body
PRONAR RC3100
Section 4
621-H.13-1
(2) socket
H.3.1.621.09.1.EN
4.23