Table of Contents
Advertisement
Chapter 5
5.19
LUBRICATION
• The trailer should be lubricated with
a hand or foot grease gun, filled with
the recommended lubricant. If pos-
sible, remove old grease and other
contaminants before starting work.
After finishing work, wipe off excess
grease.
• Parts that should be lubricated using
machine oil should be wiped with
a dry clean cloth. Apply the oil with
a brush or oiler. Wipe off excess oil.
• The replacement of grease in wheel
Table 5.5.
Lubricants
Item Symbol
1
A
general purpose machine grease (lithium, calcium),
solid grease for heavily loaded components with the addition of MOS
2
B
graphite
3
C
anti-corrosive spray
4
D
plain machine oil, silicone spray grease
ADVICE
Lubrication frequency (TableTrailer lubrication
schedule):
D - working day (8 hours of trailer),
M-month
PRONAR T672ECO
5.24
Periodic inspections of the trailer
hub bearings should be entrusted to
specialized service points equipped
with the appropriate tools. Dismantle
the entire hub, remove the bearings
and individual sealing rings. After
thorough cleaning and inspection,
install
lubricated
necessary, bearings and seals be
replaced.
• Empty containers of grease or oil be
disposed of in accordance with the
lubricant manufacturer's instructions.
Description
components.
If
or
2
I.3.3.259.19.1.EN
Advertisement
Table of Contents
