PRONAR RC3100 Operator's Manual page 21

Basic information
1
Figure 1.4 Attachment points on the trailer
(1) transport lug
ATTENTION
Do NOT secure lifting slings or any types of securing
elements to hydraulic and electrical system com-
ponents and fragile elements of the machine (e.g.
shields, conduits)
stays, etc.) and the force necessary for
their tensioning depends on a number of
things, including weight of the trailer, the
design of the transport vehicle, speed of
travel and other conditions. A correctly se-
cured trailer does not change its position
with regard to the transport vehicle. The
securing elements must be selected ac-
cording to the guidelines of the Manufac-
turer of these elements. In case of doubt
use a greater number of securing straps in
order to immobilise the trailer. If necessary,
2
1
(2) frame
1 1
sharp edges of trailer should be protected
at the same time protecting the securing
straps from breaking during transport.
During reloading work, particular care
should be taken not to damage parts of the
machine's fittings or the lacquer coating.
The tare weight of the trailer in condition
ready for travel is given in table (3.1).
TRAILER TRANSPORTED BY THE
If a purchased trailer is transported by
the user, the user must read the Opera-
tor's Manual of the trailer and adhere to
the recommendations contained therein.
Transport of the trailer by the user involves
towing the trailer with own truck tractor to
destination. During transport adjust travel
PRONAR RC3100
Section 1
1 1
621-E.04-1
USER
1.9