Table of Contents
Advertisement
CHAPTER 3
Pronar T400
Figure 3.13
Steering system components
(1) steering lock cylinder, (2) rear steering axle, (3) hydraulic quick coupling, (4) hydraulic
hose, (5) information label
3.12 LUBRICATION SYSTEM
The trailer is equipped with a lubrication system facilitating lubrication of the floor conveyor
chain drive mechanisms. The construction of the loading box enables the installation of a
lubrication system on the right or left side of the trailer. The grease nipple body (4) is screwed
to the load frame beam. Grease nipples (1) are screwed into the body (4) and are connected
to the grease lines (3). The wires run to the angled terminals screwed into the shafts of the
drive mechanism.
3.19
Advertisement
Table of Contents
