Operation Of Mechanical Support - PRONAR RC3100 Operator's Manual

Section 4

4.3 OPERATION OF MECHANICAL SUPPORT

SETTING THE SUPPORT TO DRIVING
• Immobilise tractor and trailer with
parking brake.
The tractor must be connected
with the trailer before the support
is raised.
• Unlock the cotter pin (4) and remove
the safety pin from the parking po-
sition (3).
• Turn the support to position (2).
• Insert the pin in position (5) and
secure it with cotter pin (4).
3 4
Figure 4.4 Support operation
(1) support in parking position
(4) cotter pin of pin
4.6 PRONAR RC3100
POSITION
Do NOT move off or drive with the support in park-
ing position Be sure to change support to the driving
position.
Do NOT travel with the trailer if the support securing
elements are damaged or lost – safety pin (3) and
R-clip (4).
SETTING THE SUPPORT TO PARKING
3
1
(2) support in driving position
(5) safety pin in driving position
ATTENTION
• Prior to moving off, release trailer's
parking brake.
• Immobilise tractor and trailer with
parking brake.
• Unlock the cotter pin (4) and remove
2
5
(3) safety pin in parking position
Correct use
POSITION
621-H.04-1