Technical inspection schedule
5.6 INSPECTION OF CONNECTION PLUGS AND SOCKETS
Damaged connection body or socket
body should be replaced. In the event of
damage to cover or seal, change these el-
ements for new reliable elements. Contact
of pneumatic connection seals with oils,
grease, petrol etc. may cause damage
and accelerate ageing process.
If the trailer is unhitched from the tractor,
connections should be protected by covers
or placed in their designated sockets.
Before the winter, it is recommended to
preserve the seal with special preparations
(e.g. silicon grease for rubber elements).
Each time before hitching the machine, in-
spect technical condition and cleanness of
connections and sockets in truck tractor.
If necessary, clean or repair tractor sockets.
1
2
3
Figure 5.4
Trailer connections
(1) pneumatic plug
(2) electrical plug
(3) hydraulic plug
PRONAR RC3100
Section 5
621-H.01-1
I.3.1.209.02.1.EN
5.9