Checking Technical Condition Of Hydraulic; Connections And Sockets; Replacement Of Hydraulic Conduits; Lubrication - PRONAR T023 Manual

PRONAR T023, PRONAR T023M
INSPECTION

5.5.3 CHECKING TECHNICAL CONDITION OF HYDRAULIC

CONNECTIONS AND SOCKETS.

Hydraulic connections must be technically reliable and kept in a clean condition. Each time
before connecting, check if sockets in tractor are maintained in good working condition.
Hydraulic systems of the tractor and trailer are sensitive to the presence of permanent
contamination, which may cause damage to precision system components.
INSPECTION

5.5.4 REPLACEMENT OF HYDRAULIC CONDUITS

INSPECTION
Rubber hydraulic conduits must be replaced every 4 years regardless of their technical
condition. This should be entrusted to specialised workshops.

5.6 LUBRICATION

Trailer lubrication should be performed with the aid of a manually or foot operated grease
gun, filled recommended grease. Before commencing work insofar as is possible remove old
grease and other contamination. Remove and wipe off excess oil or grease.
• After the first week of use.
• Every 12 months.
• Each time before hitching trailer to tractor.
• Every 4 years.
5.24
SECTION 5