PRONAR RC3100 Operator's Manual page 53

Design and operation
(9). The return conduit is equipped with
a check valve (5) ensuring oil flow in one
direction only.
Steel rope ended with a hook is wound
around the drum (2). The steel rope is
routed between vertical and horizontal
direction rollers. The winch is controlled
by means of a remote control (6), which
controls the solenoid valve (7). On the
right side of the drum there is a lever (8),
whose task is to disconnect the drum drive
in order to unwind the rope without the use
of the hydraulic motor.
On the front wall of the trailer chassis
there is a warning sticker (10) specifying
the winch pulling force depending on the
number of layers of rope wound on the
drum.
PRONAR RC3100
Section 3
G.3.1.621.07.1.EN
3.13