Replacement Of Bulbs; Trailer Lubrication - PRONAR T663/1 Operator's Manual

SECTION 5
Checking technical condition of electrical system:
TIP
Before driving off, make certain that all lamps and reflectors are clean.
5.5.2

REPLACEMENT OF BULBS

Compatible bulbs are shown in table (5.3). All light lenses are secured by screws and it is not
necessary to dismantle whole lamp or trailer subassemblies.
TABLE 5.3 List of bulbs
LAMP
Rear left lamp assembly
Rear right lamp assembly
Licence plate light
Front parking light
Rear clearance light

5.6 TRAILER LUBRICATION

Trailer lubrication should be performed with the aid of a manually or foot operated grease
gun, filled with recommended grease. Before commencing work insofar as is possible
remove old grease and other contamination. Remove and wipe off excess oil or grease.
Parts to be lubricated with machine oil should be wiped with dry clean cloth and then a small
quantity of oil should be applied to their surfaces (using oil can or brush). Wipe off excess oil.
• each time while connecting the trailer.
LAMP TYPE
WE 549L
WE 549P
LT-120
LO-110PP
J.K- 1.6
BULB / QUANTITY
IN 1 LAMP
R10W / 1 pc.
P21W / 2 pcs
R10W / 1 pc.
P21W / 2 pcs
C5W / 1 pc.
C5W / 1 pc.
R5W / 1 pc.
5.23
Pronar T663/1 T663/1 SILO
NUMBER
LAMPS
OF
1
1
2
2
2