Exporting A List Of Users - Cisco 1120 Installation Manual

Working with System Data
Transferring 'groups.txt' completed
The system prompt returns.

Exporting a List of Users

This section details the procedure for exporting a list of ACS users to an FTP server for further
examination and processing.
Before You Begin
You must have the FTP server address and pathname, as well as the proper credentials for writing to the
FTP server (username and password).
Performing this procedure stops and restarts the CSAuth service, and will interrupt use of the ACS.
Caution
To export a list of users to an FTP server:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
Tip
Result: The console displays:
Command will restart CSAuth. Are you sure you want to continue? <Y/N>:
Performing this procedure stops and restarts the CSAuth service, and will interrupt use of the ACS.
Caution
To proceed, enter
Step 3
At the
Step 4
hostname, and press Enter.
At the
Step 5
press Enter.
At the
Step 6
At the
Step 7
Result: ACS exports the file of the list of users to the specified location, When this is completed the
console displays:
Transferring 'users.txt' completed
The system prompt reappears.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
4-12
exportusers
You can enter the following parameters after the command or in response to subsequent prompts:
[server] [username] [filepath]
, and press Enter.
Y
Enter FTP Server Hostname or IP Address:
Enter FTP Server Directory:
Enter FTP Server Username:
Enter FTP Server Password:
Chapter 4 Administering the Cisco 1120 Secure Access Control Server
Logging In to the CSACS 1120 from a Serial
, and press Enter.
prompt, enter the FTP server IP address or
prompt, enter the FTP server directory pathname, and
prompt, enter the FTP server username, and press Enter.
prompt, enter the FTP server password, and press Enter.
OL-19455-01