Restarting Acs Services From A Serial Console - Cisco 1120 Installation Manual

Basic Command Line Administration Tasks
To start an ACS service:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
want to start, and press Enter.
Tip
Result: The console displays:
Starting service: [service name].s. . . .
[service name] is starting
[service name] is running

Restarting ACS Services from a Serial Console

Note You typically restart ACS services in the web interface.
You can restart any ACS service from the serial console. ACS services include:
•
•
•
•
•
•
•
•
Tip
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
4-6
start
You can list more than one service to start; enter a single space between each.
CSAdmin
CSAgent
CSAuth
CSDbSync
CSLog
CSMon
CSRadius
CSTacacs
To list the services and their status, you can use the show command. For more information, see
Determining the Status of CSACS 1120 System and Services from a Serial
Chapter 4 Administering the Cisco 1120 Secure Access Control Server
Logging In to the CSACS 1120 from a Serial
followed by a single space and the name of the ACS service that you
Console.
OL-19455-01