Required Tools And Equipment - Cisco 1120 Installation Manual

Preparing Your Site for Installation
c.
d.
You can also contact the Cisco Service and Support website for assistance at:
Step 4
http://www.cisco.com/en/US/support/
Duration of Hardware Warranty
Ninety (90) days.
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten
(10) working days after receipt of the Return Materials Authorization (RMA) request. Actual delivery
times can vary depending on the customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from which you purchased the product. If you purchased the product directly from
Cisco, contact your Cisco Sales and Service Representative.
Complete the information below, and keep it for reference:
Company product purchased from
Company telephone number and
website location
Product model number
Product serial number
Maintenance contact number
1. See the

Required Tools and Equipment

The fastener pack in the rack-mount kit, contains eight rack screws. You must check these screws to
Caution
ensure that they are the appropriate size for the holes in your rack. Using the wrong-sized screws for
your threaded rack holes can damage the rack.
You need the following tools and equipment to install the CSACS 1120 Series appliance in a 4-post rack:
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
•
•
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
2-12
Click Go.
The Cisco warranty page appears.
Review the document online, or click the PDF icon to download and print the document in PDF.
1
"Product Serial Number Location" section on page 1-3
for more information.
ESD-preventive cord and wrist strap.
Number 2 Phillips screwdriver.
—
—
—
—
—
and the "Product Serial Number Location" section on page D-7
Chapter 2 Preparing for Installation
OL-19455-01