Checking Command Syntax; System Help; Command Description Conventions; Commands - Cisco 1120 Installation Manual

Checking Command Syntax

Checking Command Syntax
The serial console interface provides several types of responses to incorrect command entries. If you
enter a:
•
•
•
In addition, some commands have command-specific error messages that notify you of a valid command
that cannot run correctly.

System Help

You can obtain help by using the following methods:
•
•

Command Description Conventions

Command descriptions in this document and in the CLI help system use the following conventions:
•
•
•
•
•

Commands

This section describes the CSACS 1120 commands.
Command names are case insensitive.
Note

add guiadmin

To add a GUI account that a remote user can use to access the ACS web GUI, use the add
guiadmin command:
add guiadmin [ admin ] [ password ]
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
C-2
Command line that does not contain any valid commands, the system displays
Valid command but, omit required options, the system displays
Valid command but, provide invalid options or parameters, the system displays
For a list of all commands and their syntax, enter
For help on a specific command, enter the command name, a space, and a question mark (?), and
then press Enter, for example,
Vertical bars (|) separate alternative, mutually exclusive elements.
Square brackets ([ ]) indicate optional elements.
Braces ({ }) indicate a required choice. Braces within square brackets ([{ }]) indicate a required
choice within an optional element.
Bold indicates commands and keywords that are entered literally as shown.
Italics indicate arguments for which you supply values.
, and then press Enter.
help
?. The help contains command usage information and syntax.
show
Appendix C Command Reference
Command not found
.
Incomplete command
Invalid input
OL-19455-01
.
.